capture video

How to load the Badgy Cards?

Badgy printers accept cards with thicknesses from 0.50 to 0.76 mm (20 to 30 mil), while adjustment for card thickness is performed automatically.

  1. Press on both sides of the feeder and detach it from the printer by lifting it up and out.
  2. Flip the feeder over to gain access to its lower part.
  3. Depress the plate and insert the cards. Repeat this process until you have loaded the feeder with the required number of cards. Note that the feeder maximum capacity is of 100 cards maximum, for cards with a thickness of 0.76 mm (30 mil).
  4. Insert the feeder back into the printer. The feeder will be correctly positioned when you can actually hear a click on inserting it in the printer.